JRDbuilt Posted April 14, 2008 Share Posted April 14, 2008 (edited) NEW LIST OF PARTS PLEASE CHECK!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I have some stuff id like to get rid of. mainly just trying to get cash to buy more parts. 01 Cobra IRS with cobra brakes and all still attached. This is the nicer setup out of the new edge cobras sense it has the 31 spline axles compared to the 99's haven 28. includes the exhaust if interested I would like 650 for it all. I have a complete Maximum Motorsports Maximum grip box. it cost 4500 originally but sense I need some of the kit im selling pieces. this is whats for sale. id like 2750 for everything listed. 2001 cobra motor. immaculate condition pulled from wrecked car. 60k miles 2850 Tremec 3650 trans. complete without the shifter 750 # MM K-Member ( for pushrod setup) # MM Front Control Arms w/ urethane bushings # MM Adjustable Tie-Rod Ends # MM K-Member Brace # MM Full Length Sub-frame Connectors # MM Aluminum rack bushings # MM Rear Lower Control Arms without spring perch or swaybar mount # MM Valved Rear Konis I have a pair of 2 Piece Baer Rear brakes 350 PM here [email protected] 404 408 2368 Edited June 23, 2008 by Guest Quote Link to comment Share on other sites More sharing options...
JRDbuilt Posted April 15, 2008 Author Share Posted April 15, 2008 I will sell in pieces and not the whole thing if someone is interested. make offers. Quote Link to comment Share on other sites More sharing options...
Rook Posted April 19, 2008 Share Posted April 19, 2008 Curious, what are you trying to get for the K-member? Also what are the rates of the Hypercoils? Quote Link to comment Share on other sites More sharing options...
JRDbuilt Posted April 20, 2008 Author Share Posted April 20, 2008 Honestly best offer. Id like to sell the K member and the A arms / bushings together sense they go together but best offer. shoot one my way if your interested. CJ Quote Link to comment Share on other sites More sharing options...
Rook Posted April 22, 2008 Share Posted April 22, 2008 PM absolutely sent. Let's talk. Quote Link to comment Share on other sites More sharing options...
JRDbuilt Posted April 24, 2008 Author Share Posted April 24, 2008 everything responded too. Quote Link to comment Share on other sites More sharing options...
bsmith782 Posted April 25, 2008 Share Posted April 25, 2008 Got any lowering springs for a 99 Cobra? Thanks. Quote Link to comment Share on other sites More sharing options...
Gr8-96GT Posted April 26, 2008 Share Posted April 26, 2008 Hi will the Irs rear cobra brakes bolt up to a live axle car? If so Im intersted in the rear calipers, rotors, lines, antimoan braket andcaliper braket mount. THanks.. Quote Link to comment Share on other sites More sharing options...
Driver Posted April 29, 2008 Share Posted April 29, 2008 Price for the rear hubs and brake rotors? I *may* be able to press these into my MN12 rear knuckles. I need to cross reference the splines. Scratch that, I've got 28. Sorry for wasting a post. Quote Link to comment Share on other sites More sharing options...
JRDbuilt Posted May 12, 2008 Author Share Posted May 12, 2008 GR8-96GT - the brakes should work fine. I have never done that swap personally but ive heard of a ton of people doing it. CJ Quote Link to comment Share on other sites More sharing options...
Rook Posted May 21, 2008 Share Posted May 21, 2008 IRS brakes do in fact work on live axles provided you have the proper bracket...likely found on 98 or earlier cobras. JRD - again, pleasure doin business with ya. Lemme know when you've got another K-member to get rid of! Quote Link to comment Share on other sites More sharing options...
JRDbuilt Posted May 23, 2008 Author Share Posted May 23, 2008 Rock, thanks for being such an awesome customer when some unexpected's popped up. Not sure if you are interested but the Tube M&M K member that was sitting in the shop is now for sale. I was thinking about putting it in my car but i might just get the cobra running into a nice street car and enjoy it that way. thanks again! CJ Quote Link to comment Share on other sites More sharing options...
JRDbuilt Posted June 17, 2008 Author Share Posted June 17, 2008 M&M K member is not being used and is still for sale. the rest of the MM stuff is for sale. rear Koni's still for sale. thanks CJ Quote Link to comment Share on other sites More sharing options...
Rook Posted June 20, 2008 Share Posted June 20, 2008 Hey man, sent you a PM. Sorry I didn't get back sooner, got a deployment in a couple months so I've been pretty busy. Quote Link to comment Share on other sites More sharing options...
Lisa@BMC Posted July 8, 2008 Share Posted July 8, 2008 What all do you have for a '97 Cobra? Quote Link to comment Share on other sites More sharing options...
JRDbuilt Posted July 17, 2008 Author Share Posted July 17, 2008 The front K member would work but its for a pushrod setup so its not for a modular motor. 01 cobra motor with decent miles and tremec 3650 trans. Quote Link to comment Share on other sites More sharing options...
cobra347 Posted July 17, 2008 Share Posted July 17, 2008 What are you looking to get for the koni's are they new and for a irs or straight axle Thanks Quote Link to comment Share on other sites More sharing options...
JRDbuilt Posted July 17, 2008 Author Share Posted July 17, 2008 the only konis I have left are for the rear. they arent brand new but have a couple of track days on them. CJ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.