Jump to content
ELO168

AAA with H4

Recommended Posts

ELO168

Would I run out of gear at AAA speedway?

Stock D16 with 4.7 final gear, stock redline, running on 205 and 225, 15 inch.

Is a CRX SI.

 

Thanks

Share this post


Link to post
Share on other sites
ILIKETODRIVE

I doubt it. An AZ H2 car I've raced against went there last year with a B20 setup and JDM ITR gearbox and 225/50 and he didn't run out of gear. His fuel cutoff was 7400 and he made 154whp. His gearing setup was slightly shorter.

 

your 5th = .771

your FD = 4.7

 

his 5th = .787

his FD = 4.785

Share this post


Link to post
Share on other sites
ELO168

But he had a B20 with 7400 redline.

I have D16 with 7000 redline.

Let's hope so, cause planning to sign up for the March AAA event. It would suck if getting fuel cut off on the straight.

It happened to my M3 with 3.73 gear. Top out at 125mph

Share this post


Link to post
Share on other sites
ILIKETODRIVE

But he made 154whp. You probably make...110whp? 115whp?

Share this post


Link to post
Share on other sites
ELO168

115Whp with Stock D16?

Don't think so more like 104

Are you going?

Share this post


Link to post
Share on other sites
ILIKETODRIVE

Oh damn. 104 hurts the eyes lol.

 

What weekend in March is Autoclub? I've done Chuckwalla and Streets of Willow but have yet to race at Autoclub. :\

Share this post


Link to post
Share on other sites
ELO168

Yeah 104 at the crank not at wheel:((

March 2-3

Share this post


Link to post
Share on other sites
ILIKETODRIVE
Yeah 104 at the crank not at wheel:((

March 2-3

That's lower than factory! That thing needs a refresh!

 

If funds are going well this month, I may sign up and head out! Try to lay down some blazing PTE times!

Share this post


Link to post
Share on other sites
ELO168

No dude stock is only around 104 hp for us motors

My engine just got rebuilt.

Share this post


Link to post
Share on other sites
ILIKETODRIVE

I know it made a nice difference having the D16Z6 IM (larger runners and plenum) on my old D16A6 but it made 112whp with that and I/H/E/tune. Bone stock bore/stroke/compression/cam.

Share this post


Link to post
Share on other sites
ELO168

Don't think is legal for H4

Share this post


Link to post
Share on other sites
ILIKETODRIVE

Yeah it's not unfortunately.

Share this post


Link to post
Share on other sites
ELO168

Going to stay in H4 as long as I can, don't really fell like H2, since they have HP cap now:((

Share this post


Link to post
Share on other sites
ILIKETODRIVE

But you're obviously nowhere near it!

Share this post


Link to post
Share on other sites
ELO168
But you're obviously nowhere near it!

 

Share this post


Link to post
Share on other sites
ILIKETODRIVE
But you're obviously nowhere near it!

 

Sorry that was a tad harsh lol.

 

Share this post


Link to post
Share on other sites
ELO168

If you meant speed wise, then your are wrong, actually the H4 is one of the slowest car I have.

My previous one where DSR and M3

PREGRID.jpg

M3.jpg

Share this post


Link to post
Share on other sites
V6SW21

Similar topic but how close are the tops speeds compared to Big Willow. If one is getting close to redline at willow, where is he going to end up at Autoclub?

Share this post


Link to post
Share on other sites
ELO168

It seems no one can really answer it.

 

Well on my M3 i change to 3.73 rear ratio and was hitting the rev limiter, top speed was only 128mph

Almost all the cars passed me on the straight.

Share this post


Link to post
Share on other sites
ELO168

Just signed up, so anyone else going in H4?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...