Jump to content

For Sale: 99 Miata PTE/D build


Red_5

Recommended Posts

I'm putting this up for sale again. I just bought a '01 Miata to become a street legal track car so I won't be selling off all of my spares this time which means a lower price.

 

Price with OS Giken LSD installed $14K

Price with Torsen LSD $13K

 

I'm happy to negotiate the price based on removing equipment listed below.

 

I bought the car 7 years ago from the original owner as a street car. It had 72k miles then, not sure how many now since the dash has been out for several years. Started tracking the car fall of 08. First cage went in in 09.

NASA logbook

Cage was originally installed by 7s Only in '09 but Blackbird replaced the most of the drivers side Jan '13

Blackbird Fabworx driver floor and tunnel mod to center race seat

Cobra Evo seat installed Jan '13

Schroth Enduro Harness installed Jan '14

Rebello built 0 points PT engine with <50 hours on it. Balanced, blueprinted, forged rods, forged pistons, stiffer valve springs(~$7k engine)

Boundary engineering oil pump gear in blueprinted oil pump

M-tuned coolant re-route

Koyo 37 mm radiator

AWR engine mounts

01+ exhaust manifold

Borla SM race exhaust developed on this car, includes both mufflers and dump for single muffler setup.

DDM Werks CAI with fully enclosed filter box, insulated cross over tube

VICS intake manifold

Dynotronics flashed ECU, will include stock ECU

5 speed NB trans

Spec stage 2 clutch

ACT Prolite 9.5 pound forged steel flywheel

4.30 Torsen LSD on the car or 4.30 OS Giken installed

Xida-S coilovers 700f 450r,

RB 99/00 front sway bar, stock rear bar and will include MSM rear bar

Energy poly bushings

Sport brake front Calipers and rotors, stock rears

Brake bias valve

Sport brake master cylinder and booster

Windshield is stock with a crack and rock chip but will include new Polycarbonate windshield and hardware

EP / SPM front air dam

Blackbird SPM rear spoiler

2 sets of 15x8 6ULs Gen 2 silver are on their 3 set of tires used and have good RC-1s mounted, Black on first set of tires

Spare front and rear hubs with ARP wheel studs on all hubs

Spare front bumper cover

7s Only fiberglass lightweight hardtop with polycarbonate rear window

Racepak IQ-3 dash/logger with oil temp, tach, water temp, AFR sensors

Momo steering wheel with NRG QR

Custom dash/console

Ballast plates in various weights cut to fit passenger floor - 95 pounds total

Recent green plasti-dip. Red paint is in decent shape and I did not scuff it before spraying the plasti-dip.

Will negotiate price and change out / remove parts and reduce spares to reduce price. I'm not selling any extras until car sells.

 

Car is located in Santa Barbara. Please PM for contact info.

 

7660d1407357712-fs-99-miata-pte-supermiata-race-car-1382870_610805215671007_1612596171_n.jpg

7661d1407357712-fs-99-miata-pte-supermiata-race-car-img_1461.jpg

7658d1407357523t-fs-99-miata-pte-supermiata-race-car-engine-bay.jpg

7659d1407357524t-fs-99-miata-pte-supermiata-race-car-cobra-race-seat.jpg

Link to comment
Share on other sites

  • 3 months later...
Wow. Great deal! I hope someone on the easy coast buys this

Sorry, I just saw this response. I would be happy if someone on the east coast bought it too. Or someone on the west coast. . .

Link to comment
Share on other sites

  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...