Gas4 Posted March 9, 2017 Posted March 9, 2017 I am aiming to get into ST2 with my C7 Vette. I can use any advice and guidance on getting the car race ready as it is in street trim at the moment. My first hurdle is finding a shop in the NJ area that can handle fabricating and installing a compliant roll cage. Does anyone have any recommendations on a shop? Ideally it would be a shop that has experience getting a production vette race ready. Any other help/advice/guidance on how to get going is much appreciated. Quote
Vettedoctor Posted March 10, 2017 Posted March 10, 2017 Check these guys out, they are active in NASA and can point you in the right direction. http://www.ajhartmanracing.com Quote
davidfarmer Posted March 11, 2017 Posted March 11, 2017 We have a shop that does aluminum frame cages, but I'd stick with a c6 due to the excess weight and gadgetry of the c7. Phoenix can help for a large fee Quote
Gas4 Posted March 11, 2017 Author Posted March 11, 2017 Check these guys out, they are active in NASA and can point you in the right direction. http://www.ajhartmanracing.com Thanks. Will connect with them. Quote
Gas4 Posted March 13, 2017 Author Posted March 13, 2017 We have a shop that does aluminum frame cages, but I'd stick with a c6 due to the excess weight and gadgetry of the c7. Phoenix can help for a large fee Do you have a site or contact info? Quote
Drew W. Posted September 8, 2017 Posted September 8, 2017 We have a shop that does aluminum frame cages, but I'd stick with a c6 due to the excess weight and gadgetry of the c7. Phoenix can help for a large fee Do you have a site or contact info? http://phoenixperformance.net/index.html Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.