Tansar_Motorsports Posted September 9, 2019 Share Posted September 9, 2019 Considering purchasing an SCCA logbooked RX8 and converting it to NASA ST5/TT5. Question about the roll cage requirements. The NASA roll cage guidelines specifically state that cages should have 6, 7, or 8 connection points to the chassis (main hoop to the floor, A pillar tube to the floor, rear braces to the rear shock top area, and forward braces coming off of the A pillar tube that reach out to the firewall) (I'm paraphrasing here). The RX8 I'm considering has all of these points, but it also has a small section of tube coming off of the bottom of the nascar style door bars and tying into the floor on both sides. Is this going to be an issue / will these have to be cut off? Quote Link to comment Share on other sites More sharing options...
Tansar_Motorsports Posted September 9, 2019 Author Share Posted September 9, 2019 Nevermind. I found the roll cage mounting point exception in the ST5 rules. All good. Additional mounting points allowed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.