Jump to content
Magus2727

Number and classification marking size

Recommended Posts

Magus2727

per the rule in ST6/5 in 9.1: 

Quote

All NASA ST cars must display the car’s number on both sides and the front and rear of the car. Numbers must be of a contrasting color to the car or otherwise clearly visible, at least 10-inches tall with a 1.5-inch stroke for the sides, and four (4) inches tall for the front and rear. NASA ST cars must also display a class designation on both sides and the front and rear of the car in a four-inch height in contrasting color to the car. Class Designations shall be ST followed by the group number.

This specifies the height and the stroke width of the larger 10" numbers and 1.5" stroke width.  Do the 4" numbers and letters than also need to still be 1.5" in stroke width or since they are only 4" tall they can have a narrower stroke width than 1.5"?

Thank you.

Share this post


Link to post
Share on other sites
Greg G.

The width is only listed for the side numbers.  There is no specification for stroke width for the front and rear, but they  must be visible.

Share this post


Link to post
Share on other sites
Magus2727

Thank you!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...