kartermdb Posted January 19, 2021 Share Posted January 19, 2021 Permitted exceptions to 6.2.1 states: Quote 1h) Reinforcement of suspension mounting locations on OEM frame rails,Sub-frames/suspension cross-members, and unibody is permitted provided there is no performance benefit or relocation of the mounting points. Does this mean that I am able to permanently weld a washer on a factory location tab eliminating the adjustment slot and still comply with the rules? See photo of slot below. Quote Link to comment Share on other sites More sharing options...
National Staff Greg G. Posted January 20, 2021 National Staff Share Posted January 20, 2021 That would seem to make sense--reinforcing with the washer, and still using the factory mounting location, just without the adjustment slot... Quote Link to comment Share on other sites More sharing options...
CRallo Posted March 1, 2021 Share Posted March 1, 2021 (edited) Along the same lines, what about reinforcing or adding a differential or engine mount on a subframe? Edited March 7, 2021 by CRallo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.