Jump to content

1969 Porsche 911 GT3 Race Car F/S


Recommended Posts

1969 Porsche 911 GT Race Car with 3.4L Race Engine:


Fully developed and sorted 1969 911 GT race car with fresh 3.4L racing engine. Currently set up for PCA and Porsche Racing Club GT3 class. Current engine, suspension design and set up by Mat Lowrance of Reno Rennsport. PCA and NASA logbooks. Dry weight of 19xx pounds (with oil). Fresh and unpainted 993 widebody fiberglass bodywork.


Dual axle open trailer with large front mounted tire rack, fuel jug storage and lockable tool box.


Spares and supplies include fuel transport bottles, funnel, et cetera. A turnkey racing package. $125K + to duplicate, asking $39K OBRO


Contact: Neil Jackson: 925.785.0247 or [email protected].

Located in San Francisco Bay Area. Photos can be seen here: https://postimg.org/gallery/lq2gq380/




Developed in stages from a 1969 911T. California titled and never crashed.


Custom roll cage connects to front and rear pickup points. Stock rear seats and crossmember have been removed and replaced with a custom suspension support structure (improved geometry) and removable cover panels.


Interior is stripped of all insulation/soundproofing.


Fuel Safe fuel cell.




Fresh and unpainted Getty Design 993 widebody-style fiberglass hood, fenders, decklid, quarter panels, roof, and bumpers. Easy to paint, cover with a vinyl wrap or change to a different body style. All bodywork attached with Dzus fasteners for access.


Getty Design front splitter for improved downforce.


Custom aluminum rocker extensions for improved aerodynamics.


Getty Design 70 inch "Predator" rear wing.


Hood is vented for oil cooling and increased front downforce.


Custom lightweight door latch mechanisms.


Lexan (polycarbonate) windshield, removable rear window, rear quarter windows and door windows (for open trailer transport; easily removable).




Front suspension includes custom-valved Bilstein RSR-style struts with raised pickup points, monoballs and coilover springs. Front through-body racing sway bar with adjustable drop links.


Rear suspension features Porsche aluminum trailing arms, custom-valved Bilstein RSR-style rear shocks mounted upside down. Shocks are attached to a custom crossmember structure which is tied into the cage for improved stiffness and geometry.


Custom rear spring plates ("935-style"). Rear pickup points raised from stock location for improved suspension geometry and handling.


Wheels, Tires and Brakes:


Two sets of brand new Kodiak racing wheels. Front 11 x 16 and rear 13 x 16. Car is currently set up to run bias ply slicks (10-12 x 16 front and 12-14 x 16 rear).


Brake system features 4-piston Porsche/Brembo calipers (front 930 and rear 944 Turbo). Adjustable front/rear bias control in cockpit. Stainless braided brake lines.


Engine and Drivetrain:


3.4L racing engine with Haltech electronic fuel injection (EFI) and single plug MSD ignition. Engine is fresh with about 1-2 hours of tuning only. Individual throttle bodies, Mahle 98 mm pistons. Approximately 330-340 bhp.


Custom oil plumbing with dual front-mounted oil coolers.


915 transmission with customized ratios. WEVO short throw shifter. Fresh CV joints.


Electrical System:


Custom wiring throughout with provisions for Cool Shirt system. Fuel pressure gauge. New lightweight battery. Custom dash board with toggle switches.




Momo steering wheel and racing seat. Cool Shirt system.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...